I diy homemade goat milk soap, why have you start using it!

DIY Homemade Goat Milk Soap, See Why You Should Start Using It!!

Many people are still washing the skin with soap made with water. The change to soap made with goat’s milk can be really beneficial for skin health. Goat milk soap is wonderful for people with dry or sensitive, or conditions such as eczema and psoriasis skin. It is also perfect for healthy skin that wants to remain so. Raw goat milk fresh from the farm contains the following benefits.

1. The alpha hydroxy acids. Goat milk contains alpha-hydroxy acids such as lactic acid that helps remove dead skin cells from the surface of the skin. This leaves the new cells on the surface of the skin that are softer and younger. The alpha-hydroxy acids are so effective because the bonds holding dead skin cells together are broken. The removal of dead skin cells help many skin diseases by eliminating irritation. water based soaps strong chemical acids can be used to achieve this, often with results that damage the skin.

2. Vitamins. Goat milk contains many vitamins, but is particularly high in vitamin A, which is needed to repair damaged skin tissue and maintain healthy skin. There have been several medical studies that show that creams with vitamin A reduce lines and wrinkles, acne control, and provide some relief from psoriasis. water-based soaps can be artificially fortified with vitamins, but most are not.

3. Cream. fat molecules are an important part of making a good soap. The cream is present in goat’s milk helps to increase the quality of moisturizing goat milk soaps. Since many people suffer from dry skin, especially in the winter months, this is an important quality for soap. Goat milk soap does not dry the skin out like many other soaps. This is important because keeping skin hydrated naturally helps to maintain healthy skin.

4. Minerals. Goat milk contains important for the skin, such as selenium minerals. Selenium is believed by scientists to play an important role in the prevention of skin cancer. Selenium may also help prevent skin damage from excessive sun time. Although the water used in other soaps may contain minerals such as calcium, sodium, or iron (commonly found in tap water), that’s not much help when it comes to your skin. (Note: Many areas in the United States have low selenium pastures Regarding goat milk, dairy goats receive a booster selenium, to ensure that their mineral needs are met ..)

Goats milk soap recipe

(Makes about 3 cups or 4 bars, 4-oz)

could be used any recipe soap making and substitute milk for water, but some milk are higher in fat, necessitating the use of more bleach to make it work. I used the following recipe and works very well. Depending on what type of milk is used, however, you may need to use some extra bleach. He had goat milk and having approximately the same amount of fat than whole milk. Others, like the buffalo, sheep, or yak have more fat. Increase bleach 6.5 ounces for these types of milk.

Ingredients: (Try to use organic)

  • 12 ounces of coconut oil
  • 15 ounces of olive oil
  • 13 ounces another oil – such as lard, palm oil from sustainable sources, tallow, shortening, or other comparable oil (see “additional Information”)
  • 13 ounces of milk
  • 6 ounces Lye – also called the 100% sodium hydroxide
  • 1 ounce essential and optional oils
  • additives such as oatmeal or lavender flowers, optional


  1. on the day before making the soap, you need to freeze your milk. very cold Doing things is not good enough, what should be frozen. I put mine in the main zipper bags in the freezer and keep it there until you need. Each bag is pre-measured to 13 ounces so it is ready for use.
  2. Then a large glass or stainless steel container is needed. (Avoid using plastic as it can absorb odors.) Put this in a large bowl or sink and fill the outer container halfway with cold water and ice, so it’s very cold. Inside the bowl, place the frozen milk pieces.
  3. Very slowly, add the bleach and crush gently in milk. A potato masher stainless steel works quite well for this step. Keep adding lye until all are incorporated. It is probably not hot or even warm. Do not worry about it, it is not necessary. If the ice melts the outer container, keep replacement. You must be very cold. Milk appears in orange or even tan to light brown. This is normal. If it becomes dark brown, you will have to start again. Milk burned at this point. The milk sugars are very sensitive and need to be very cold to prevent burning. And if you smell similar to ammonia, which is normal also smell – just keep going. This odor fade while it is healing.
  4. When your lye / milk is ready, keep on ice while you get the oils prepared. Measure your oils using a kitchen scale. Combine oils and heat gently until they are about 110 ° -. 125 ° F
  5. When oils are ready, slowly pour the mixture of lye / milk in oils. Mix by hand during the first 5 minutes, then use a blender (immersion) stick to carry track. If you have never made soap before, this is where it gets pretty thick, like pudding. When it is a trace, add essential oils and any additives and poured into molds.
  6. Wait 24 hours or more, remove from the molds, and if you want to cut. Wait 3-4 weeks, turning from time to time so that all parties have been exposed to air. You can test the pH test strips to ensure that it is cured (desired pH is between 8-10), or use the old method of “touching the tongue to it.” If you receive any kind of tingling on the tongue, it is not yet ready and be too harsh on the skin if used at this point. (I’ve been doing this since 1995 and some bleach in a bar uncured will not hurt.) Wrap when fully cured.


Source / reference : http://www.mycentralhealth.com/diy-homemade-goat-milk-soap-see-start-using/

You May Also Like: